MSA Ultra Elite User Manual

Order No.: 10126626/01
Quick Start Guide
3S Mask and Ultra Elite Mask
Full Face Mask
The quick start guide does not replace the operating
manual. It is imperative that the operating manual be
read and observed when using the device. In particular,
the safety instructions, as well as the information for the
use and operation of the device, must be carefully read
and observed.
The operating manual can also be provided as a hard
copy upon request.
1 Face blank 6 Exhalation valve
2 Head strap 7 Carrying strap
3 Buckle 8 Nose cup with valve
4 Lens 9 Speech diaphragm
5 Connector with inhalation valve
10 Connector with inhalation and
exhalation valves
The Full Face Masks according to EN 136 are not complete
respiratory protective devices by themselves, but serve as
facepieces [EN 136 CL3+] when combined with e.g. a filter,
breathing apparatus or air line equipment.
For cleaning/disinfection, storage, maintenance, use in
explosive or oxigen enriched atmosphere see the relevant
operating manual.
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - info@fasit.it

MSA Ultra Elite Specifications

General

Type	Full Facepiece Respirator
Sizes	Small, Medium, Large
NIOSH Approval	Yes
Lens Material	Polycarbonate
Material	Silicone
Standards	NIOSH 42 CFR Part 84
Harness	Five-point rubber or polyester

Summary

Quick Start Guide for 3S and Ultra Elite Masks

Operating Manual Disclaimer

Emphasizes that this guide is supplementary and the full manual must be read.

Component Identification

Diagrams and labels for 3S and Ultra Elite full face mask components.

Safety and Proper Mask Usage

Device Integrity and Fit Warnings

Warnings against using damaged devices and ensuring correct mask fit to prevent leakage.

Mask Fitting Demonstration

Illustrations demonstrating the correct procedure for fitting the 3S and Ultra Elite masks.