Need help?Do you have a question about the MSA G1 and is the answer not in the manual?
General| Type | Self-Contained Breathing Apparatus (SCBA) |
|---|---|
| Operating Pressure | 4500 psi |
| Cylinder Options | 30, 45, or 60-minute duration |
| Battery | Rechargeable lithium-ion battery |
| Communication | Integrated voice communication system |
| Application | Firefighting, Industrial |
| Cylinder Duration | 30, 45, or 60 minutes |
| NIOSH Approval | Yes |
| PASS Device | Integrated PASS device |
| Telemetry | Optional telemetry for remote monitoring |
Explains the basic function and intended use of the G1 SCBA system.
Details MSA's liability limitations and warranty conditions for the device.
Outlines critical safety measures, operating conditions, and PPE compatibility.
Lists device compliance with relevant directives and standards like EN 137.
Provides guidance on contacting MSA for product concerns or support.
Describes the G1 full face mask, its function, material, and available sizes.
Explains the G1 Demand Valve, its role in maintaining positive pressure and optional features.
Details the HUD's function in displaying pressure and alarm status via light pipes.
Describes the cylinder's role in storing high-pressure air and the valve assembly features.
Explains the pressure reducer's function in lowering cylinder pressure for safe use.
Details the components of the harness and carrier assembly, including straps and belts.
Describes the ADSU, motion sensor, and alarm functions.
Explains the power module's role in supplying power and data to other components.
Details the telemetry module for two-way communication and vital statistics transmission.
Describes the voice projection speaker for amplifying speech.
Provides general inspection guidelines for all SCBA components for damage or wear.
Details inspection steps for the LGDV, focusing on cleanliness and seals.
Outlines checks for the pressure reducer, including threads, O-rings, and quick connect fittings.
Specifies checks for the cylinder's test date and approval status.
Describes checks for the carrier assembly, including latches, belts, and module security.
Details inspection points for the control module's display, buttons, and connections.
Specifies checks for the secure attachment of power and battery modules.
Guides on removing, inspecting, and reinserting the battery module.
Mentions software for inventory management and service records.
Explains how to perform a negative pressure seal check for the mask.
Details the procedure for checking the pressure reducer's seal and pressure drop.
Outlines steps to verify the LGDV's operation and response to inhalation.
Describes testing LGDV tightness with a universal test device under different pressure conditions.
Explains how to check the closing pressure of the LGDV using test equipment.
Details operational checks for control module, power module, HUD, and low-pressure warning.
Describes how to test the functionality of the voice projection speaker.
Lists prerequisites before donning the SCBA, including visual and functional tests.
Step-by-step guide on how to put on the SCBA harness and adjust straps.
Instructions on how to properly put on and adjust the full face mask.
Details the procedure for performing a pre-use leak check of the full face mask.
Explains how to correctly attach and check the LGDV to the full face mask.
Provides guidance on SCBA use and storage in cold temperatures.
Explains how the HUD displays cylinder pressure status using LEDs.
Details how HUD status LEDs indicate primary and secondary alarms.
Describes the motion sensor and alarm levels detected by the control module.
Explains how to use the control module's primary screen for status information.
Lists and describes primary alarms shown on HUD, control module, and buddy lights.
Explains secondary alarm icons and their meaning.
Details the thermal alarm functionality and activation curve.
Illustrates icons for thermal, battery, and radio link status.
Describes how to assign user or team identification to the SCBA using ID tags.
Shows the screen indicators during the ID tagging process.
Explains the functions of the reset and alarm buttons on the control module.
Details the procedure for safely turning off the control module.
Step-by-step guide on how to safely remove the SCBA from the body.
Provides instructions on how to properly remove the full face mask.
Outlines critical safety measures for handling and using SCBA cylinders.
Details the process of installing the alphaCLICK 2 adapter onto a cylinder.
Step-by-step instructions for removing and attaching SCBA cylinders.
Explains the procedure for refilling SCBA cylinders safely.
Lists important precautions for using the Quick-Fill coupling system.
Guides on how to perform transfilling operations using the Quick-Fill coupling.
Presents a table outlining maintenance tasks and intervals for SCBA components.
Refers to the Full Face Mask manual for detailed cleaning and disinfection instructions.
Provides initial checks for the LGDV, focusing on hose connections and cracks.
Outlines general procedures for cleaning and disinfecting SCBA components.
Details warnings and precautions for replacing and using SCBA batteries.
Explains how to assign a user's name to the SCBA using an ID tag.
Details assigning a team or truck identification to the SCBA.
Describes how to assign a specific base station ID to the SCBA.
Guides on tagging the SCBA with an ID tag for identification and data logging.
Explains how to use the telemetry module with a base station and PC.
Details monitoring SCBA status and radio link indicator via the base station.
Provides guidelines for storing the SCBA and its components safely.
Offers advice on safekeeping the full face mask to prevent damage.
Explains how to connect and use the G1 Buddy Breather System for air sharing.
Details inspection procedures for the Buddy Breather emergency breathing hose and pouch.
Covers pre-use checks and donning the apparatus with the Buddy Breather.
Highlights procedures for connecting/disconnecting the system and training needs.
Step-by-step guide on connecting and disconnecting the Buddy Breather hoses.
Lists approvals and compliance with directives for the SCBA.
Explains the ATEX marking and temperature class for the SCBA.
Details ATEX marking, certificates, and approvals for electronic components.
Covers IECEx marking, certificates, and approvals for electronic components.
Provides specific information on LRR frequency for Australia.
Lists part numbers for various SCBA configurations and accessories.
Provides part numbers for different steel and composite SCBA cylinders.
Lists part numbers for various accessories like adapters, tags, and chargers.
Lists part numbers for telemetry software and hardware components.
Explains the ATO code system for ordering full face masks with specific configurations.
To Next Page
