MSA G1 - G1 Electronic Components

79
Certification
GB
G1 Integrated SCBA System
18.3 G1 Electronic Components
18.3.1 Marking, Certificates and Approvals According to the Directive 2014/34/EU (ATEX)
Manufacturer:
Mine Safety Appliances
Company,
1000 Cranberry Woods Drive,
Cranberry Township, PA 16066
USA
Product: SCBA Electronics Type G1
Type of protection: EN 60079-0:2012, EN 60079-11:2012
Marking:
II 1G Ex ia IIC T4 Ga
-40 °C  T
x
 +60 °C
TX: The permissible surface temperature depends on device
configuration. The permissible surface temperature of any other
equipment used together with this SCBA has to be regarded as
well.The lowest class sets the limit.
Ensure that the device is not submitted to temperatures that
exceed those permitted for any part of equipment used together
with the device.
EC-Type Examination Certifi-
cate:
BVS 14 ATEX E178 X
Battery:
6 x 1,5 V Alkaline battery size C
LR14, Terminal battery voltage
= 9V
• Energizer E93
• Duracell Procell PC1400
• Duracell MN1400
• Panasonic Industrial
LR14XWA
• Panasonic Evolta C-LR14
• Industrial Panasonic Power-
line
RF module type
alphaLRR IECEx:
frequency: 868 MHz or 915MHz
RF output power: 0,5 W
Bluetooth Module: frequency: 2.4 GHz
RF output power: < 10 mW
RFID Module: frequency: 13.56 MHz
RF output power: < 100 mW
RFID Tag type LOGI TAG
TM
161 HF:
The maximum RF radiation power of the antenna used for activation of the RFID Tag type LOGI
TAG
TM
161 HF in hazardous areas shall not exceeded 2 W for Group IIC.