Description
6
AirXpress One/AirXpress 2 Fire
GB
Overview
2.1.
There are two versions of the device available: AirXpress One and AirXpress 2 Fire.
AirXpress One
The AirXpress one is designed to meet the needs of industrial applications. The device is approved according to
EN 137:2006 type 1. The harness is designed for quick exchange and made of flame resistance material. On the upper
part of the back plate a cylinder support with integrated line positioning is attached. The AX demand valve is fixed at the
medium pressure line. In this version there are 2 kinds of back plate: AX back plate and BD back plate. There are two
kinds of pneumatic system for AirXpress One: pneumatic system without second connector and with second connector.
AirXpress 2 Fire
The AirXpress 2 Fire is fit for firefighting purposes and approved according to EN 137:2006 type 2. The harness is
designed for quick exchange and made of flame resistance material. On the upper part of the back plate a cylinder
support is attached. On the upper part of the back plate a cylinder support with integrated line positioning is attached.
The AX demand valve is fixed at the medium pressure line. In this version there are 2 kinds of back plate: AX back plate
and BD back plate.
There are three kinds of pneumatic system for AirXpress 2 Fire:
1. Pneumatic system without second connector
2. Pneumatic system with second connector
3. Pneumatic system with second connector and 2 couplings.
Basic Unit
2.2.
Totally there are five kinds of basic unit for AirXpress One and AirXpress 2 Fire, Including different back plates and
pneumatics system:
1. 500C reducer, AX demand valve, BD back plate, pneumatics system without second connector (Fig. 2).
2. 500C reducer, AX demand valve, BD back plate, pneumatics system with second connector (Fig. 3).
3. 500C reducer, AX demand valve, BD back plate, pneumatics system with second connector and 2 couplings (Fig. 4).
4. 500C reducer, AX demand valve, AX back plate, pneumatic system without second connector (Fig. 5).
5. 500C reducer, AX demand valve, AX back plate, pneumatic system with second connector (Fig. 6).
To Next Page
