Need help?Do you have a question about the MSA Gallet F2XR and is the answer not in the manual?
General| Material | Thermoplastic |
|---|---|
| Size | 52-64 cm |
| Color | Yellow, Red, Blue, White |
| Standards | EN 12492 |
| Optional Accessories | Face shields |
| Product Type | Fire and Rescue Helmet |
| Ratchet Suspension | Yes |
| Certifications | CE |
Defines the intended use of the Gallet F2XR helmet for firefighters' operations.
Outlines MSA's liability limitations and warranty conditions for product use.
Explains how to perform basic comfort and fit adjustments on the helmet while wearing it.
Details advanced adjustments to optimize helmet wearing comfort and fit, performed without wearing the helmet.
Describes how to adjust the suspension position for optimal ride height based on head size.
Explains how to adjust the nape strap height for optimal tightness and rear comfort in three positions.
Provides instructions for installing the Responder Goggles accessory onto the helmet.
Details how to remove, use, and store the Responder Goggles for optimal comfort and protection.
Describes the types and limitations of eye and face protection visors, including warnings for safe use.
Guides on installing, removing, and using the Ocular Visor, including safety warnings.
Instructions for installing and removing the Rear Neck Protector accessory.
Details how to install and remove the Lamp Holder accessory for mounting MSA flashlights.
Explains the use of hearing protection earmuffs with the helmet and important usage limitations.
Provides instructions for installing and removing hearing protection earmuff adapters.
Guides on installing the Water Rescue Lateral Protection Panel for EN 1385 compliance, with critical warnings.
Advises on proper methods for transporting and storing the helmet to extend its service life.
Details procedures for cleaning and disinfecting the helmet and its components after use.
Explains routine cleaning methods for plastic components, goggles, visors, and textile parts of the helmet.
Recommends advanced cleaning methods for heavily soiled helmets or those exposed to severe conditions.
Outlines critical inspection and maintenance procedures to ensure helmet performance and user safety.
Details visual checks required before and after each use to identify any damage or wear.
Specifies requirements for periodic advanced inspections by trained technicians or authorized centers.
Lists the applicable standards and EU regulations the helmet and its components comply with.
Explains the markings and labels found on the helmet and their corresponding information.
Provides technical specifications and performance data for face shields and ocular visors.
Lists technical specifications for helmet sizes and weight.
To Next Page
