MSA MAINTENANCE AND CARE OF THE SCBA
BD 96 SL 17
GB
4.7. Overhaul
The overhaul of the pressure reducer may only be performed by MSA or an
authorised service centre.
Attention!
Pressure reducers are completed with a lead seal. Where the lead seal
is missing or damaged, it can not be guaranteed that they are ready for
use or that they correspond to the approval status.
Optimal use of the compressed air breathing apparatus is not assured
in this case.
4.8. Storage
Store in a dry place, free from dust and dirt, at approx. 20°C. Protect apparatus
against direct sunlight.
Secure against tilting, falling down and rolling away. Please, also take into
consideration the instructions in the manual from the compressed air cylinders.
4.9. Malfunctions
In case of malfunctions in the compressed air breathing apparatus, it must be
checked and repaired by a person or service centre authorised by MSA.
To Next Page
Loading...
