EasyManua.ls Logo

MSA EVOLUTION 6000 Series - Operating the Truck Mounted Charger; System Overview and Components

MSA EVOLUTION 6000 Series
286 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MSA AUER
MSA
Truck mounted charger system
EVOLUTION 6000 series Truck Mounted Charger
9
US
3 Truck mounted charger system
Overview
Fig. 4 Truck Mounted Charger System EVOLUTION 6000 series
Inserting the Thermal Imaging Camera and/or the Spare Battery in the Truck Mounted
Charger System
The charger must not be used in an atmosphere where there are explosive or combustible gases
or vapors. Otherwise, this can cause an explosion or a fire which could cause serious personal
injury or death.
Provided that the truck mounted charger system has a power supply, battery charging begins im-
mediately after inserting the thermal imaging camera or the spare battery in the truck mounted
charger system.
NOTE: Battery must be installed in camera for charging to occur.
1 Thermal imaging camera 3 Slot for spare battery
2 Truck mounted charger system
1
2
3
WARNING
Strictly observe all regulations provided with the charger system. The apparatus will only operate
correctly if properly installed, operated and maintained. Otherwise, malfunctions can occur which
can cause serious personal injury or death.

Table of Contents

Related product manuals