Maintenance
EVOLUTION 6000 series Truck Mounted Charger
11
US
LED Indicators on the Truck Mounted Charger System
Fig. 6 LED Indicators on the Truck Mounted Charger System
4 Maintenance
Check after each use
Check the camera after each use:
- for damage, leaks and good battery contact
- proper functioning of the camera and the truck mounted charger system, especially the LEDs
- proper tension on the retaining straps
The devices may require cleaning and/or repair.
To adjust the tension on the camera retaining straps
- unbuckle the strap
- pull on the end of the strap
- re-buckle the strap and test
Cleaning
If required, the truck mounted charger system must be:
- carefully cleaned with warm water and a mild cleaning agent
- carefully dried using a soft, lint-free cloth.
Remove dirt on the charging contacts using a soft, lint-free cloth or a brush.
1 Spare battery charging in progress (red)
2 Spare battery charging complete (green)
NOTICE
Do not use solvents or paint thinners for cleaning the truck mounted charger system; the
casing surface would be effected by these products.
To Next Page
Loading...
