FIREHAWK M7 TELEMETRY MODULE
Evacuation Signal
I
f the air mask is logged on to the base station, the base
station will have the ability to send an evacuation signal to
t
he air mask. When an evacuation signal is sent to the air
mask, the FireHawk M7 Power Module will begin to beep
repeatedly and a flashing “running man” icon will appear
on the FireHawk M7 Control Module display. The evacua-
tion alarm will continue to sound until the reset button on
t
he FireHawk M7 Control Module has been pressed twice
within approximately one second. This confirms the evac-
uation by sending a confirmation signal back to the base
station.
45
TAL 803 (L) Rev. 1 - 10086011
To Next Page
Loading...
