Need help?Do you have a question about the MSA GasGard XL and is the answer not in the manual?
General| Model | GasGard XL |
|---|---|
| Display | LCD |
| Communication Protocol | Modbus RTU |
| Number of Channels | Up to 8 |
| Mounting | Wall mount |
| Detection Range | Dependent on sensor |
| Type | Controller |
| Input Voltage | 24 VDC |
| Gas | Combustible, Toxic |
| Channels | 8 |
| Enclosure | Plastic |
| Outputs | Relay, 4-20 mA |
| Enclosure Rating | NEMA 4X |
| Operating Temperature | -20°C to +50°C |
| Relative Humidity | 0 to 95% non-condensing |
Guidelines for proper operation and MSA's liability policy for GasGard XL.
Introduction to the GasGard XL, its purpose, and core components.
Steps for mechanical and electrical installation of the GasGard XL.
Navigating the GasGard XL interface, screen, buttons, and data viewing.
Setting system parameters, relays, and general options for GasGard XL.
Guides for performing manual and one-man calibration of GasGard XL sensors.
Steps for installing and using the GasGard XL configuration software.
Configuring channels and relays via the GasGard XL software.
Routine maintenance, technical specifications, and environmental conditions.
Compliance, safety conditions, and part numbers for GasGard XL.
Sensor lists, wiring diagrams, and terminal layouts for GasGard XL.
To Next Page
