MSA Ultima Controller User Manual

Ultima® Controller Guide
Because every life has a purpose...
The controller provides complete access to all advanced features of the Ultima® X Gas Monitor through its full-
function keypad. The controller is used for basic calibration functions along with displaying minimum,
maximum and average gas values, displaying date of last calibration, setting span-gas values and alarm
values, setting the real time clock, and changing address. It is completely password-protected.

MSA Ultima Controller Specifications

General

Brand	MSA
Model	Ultima Controller
Category	Controller
Language	English

Summary

Calibration and Instrument Selection

Calibration Signal

Procedures for enabling/disabling calibration signals.

Calibration Procedure

Steps for Zero Only and Zero & Span calibration.

Settings

Setting Span Values

Steps to set span gas values for the controller.

Setting Alarm Values

Procedures for configuring alarm set points and types.

Reset Latched Alarms

Process to reset latched alarms on the controller.

Programs

Notes

Regular Calibration

Initial Calibration

Default Controller Password

The default password for controller access.

Troubleshooting Tips

Calibration Fault

I CAL Adjustment

Sensor Reset

Calibration Abort