EasyManua.ls Logo

MSA Luminator Cap Lamp - Marking and Certificates According to Iecex

MSA Luminator Cap Lamp
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
Approvals
Luminator Cap Lamp
16
8.2 Marking and Certificates according to IECEx
Special conditions for safe use:
In hazardous locations the Multifunctional LED-Lamp type LUMINATOR has to
be used according to the following regulations:
- The device has to be carried at the body. Don't put the device away out of
your supervision. This is to prevent the device from electrostatic charge.
- The charging of the LUMINATOR is only allowed outside of the hazardous
area.
- For charging follow the manual instructions (5 V/1 A, U
m
= 7 V).
Manufacturer: MSA AUER GmbH
Thiemannstraße 1
D-12059 Berlin
Product: LUMINATOR
IECEx-Type
Examination Certificate: IECEx BVS 13.0084
Marking:
Ex ia I Ma
Ex ia IIC T4 Ga
-20°C Ta +60°C
Type of protection: IEC 60079-0:2011, IEC 60079-11:2011
Battery: LiFePO4 3,6 V / 9000 mAh
U
m
: 7 V
Quality Assurance Notification: 0158
Year of Manufacture: see Label
Serial Nr.: see Label