TAL 0110 (L) Rev. 8 - 10020949
ACCESSORIES
4. Grasp the outside of the cartridge,
twist and push on the spark cover.
The spark cover will snap in place.
5. To remove the spark cover, gently
squeeze the outside of the cover,
twist, an dpull the spark cover off.
6. Check the spark cover before each
use to ensure no sparks have creat-
ed holes o warped the part. If holes
are created or the part is warped,
relace the spakr cover with a new
one.
Note: the spark arresting amterial
inside the spark cover is optional.
PARTS
Confidence Plus Cleaner
(P/N 100009971)
Wall Mounted Flow Tester
(P/N 488903)
Flow Check Meter (P/N 487995) and
Adapter (P/N 491046)
28
To Next Page
Loading...
