MSI 760GM - Appendix B: SB710 RAID

B-B-1
The ntegrated one SATA host controller separately, and
support RAID functon for performance and relablty.
SB710 SATA RAID (SATA1~5) provdes support for
RAID 0 (Strpng), RAID 1 (Mrrorng) & RAID 10 (Strpng
& Mrrorng). RAID 0 greatly mproves hard dsk I/O per
-
formance by concurrently strpng data across multple
drves. RAID 1 makes sure data s not lost f a drve fals
as data s smultaneously wrtten to two drves. Drves
con󰘰gured for RAID Strpng are sad to form a RAID 0
set, whle drves con󰘰gured for RAID Mrrorng are sad
to form a RAID 1 set. RAID 10 s mplemented as a mr-
rored array whose segments are RAID 0 arrays. RAID
10 has same fault tolerance as mrrorng and reduces
overhead by strpng. It needs at least four drves to form
a RAID 10.
Appendx B
SB710 RAID