MSI 870-G45 series - Page 58

BIOS Setup
MS-7599
Chapter 3
3-21
BIOS Setup
MS-7599
Chapter 3
Success
Enter “Cell Menu” and set “Unlock CPU Core” to [Enabled].
Save changes and ext the BIOS setup.
System restart.
You wll see the “X4” (quad core) or “X2” (dual core for
Sempron seres only) durng POST.
Fal
Set “Adjust CPU-NB Rato” and
“HT Lnk Speed” to [x8].
AMD Phenom(tm) II X4 Processor
Clear CMOS data.
The CPU does not support CPU core
unlock, please leave the default settngs
for system.
AMD Sempron(tm) II X2 Processor
Advanced Clock Calbraton
Ths tem s for overclock. Settng to [Enabled] allows you to set the CPU Rato hgher.
It s avalable only when the processor supports ths functon.
CPU Core Control
Ths tem s used to control number of CPU cores. When set to [Auto], the CPU wll
operate under the default number of cores. When set to [Manual], you wll be able to
enable/dsable the spec󰘰c CPU core.
Core 1/ 2/ 3/ 4
These tems are used to enable/dsable the core 1/ 2/ 3/ 4.
OC Gene Lte
Settng ths tem to [Enabled] allows the system to detect the maxmum FSB clock and
to overclock automatcally. If overclockng fals to run, you can try the lower FSB clock
for overclockng successfully.
MEMORY-Z
Press <Enter> to enter the sub-menu and the followng screen appears.
DIMM1~4 Memory SPD Informaton
Press <Enter> to enter the sub-menu and the followng screen appears. Ths sub-
menu dsplays the nformaton of nstalled memory.
▶
▶
▶
▶
▶
▶