MSI 870-G45 series - DSplay Mode

VIA HD Audo
MS-7599
Appendx A
A-5
VIA HD Audo
MS-7599
Appendx A
Dsplay Mode
The VIA Adeck has two basc dsplay modes: “Smple Mode” and “Full Mode”.
Smple Mode
Once Adeck has been launched, the panel wll be dsplayed n the center of wndows
desktop. The Adeck system s ntalzed usng the smple mode. In ths mode, the user
only has lmted control and audo nformaton. The basc controls nclude: master vol-
ume and mute. The basc audo nformaton ncludes: peak meter, number of channels,
S/PDIF out status or sound e󰘯ect status, etc.
If you want to control the sound e󰘯ects n detal, you can clck on the buttons located on
the lower porton of the panel. These buttons are labeled: Speaker, Mxer, E󰘯ect, Jack,
S/PDIF and Info. When any of the buttons are actvated, the Adeck system wll go nto
full mode for detaled control.
To ext Adeck, smply clck the Power button on the Adeck panel.
Full Mode
In the full mode, the bottom porton of Adeck expands. Dependng upon the button that
was selected, d󰘯erent panels wll be dsplayed n the expanded porton.