C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all proces
-
sors support Enhanced Halt state (C1E). 
SVM Support
Ths tem s used to enable/ dsable SVM.
AMD Cool’n’Quet
The  Cool’n’Quet  technology  can  eectvely  and  dynamcally  lower  CPU  speed  and  
power consumpton.
C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all processors 
support Enhanced Halt state (C1E). 
Adjust CPU FSB Frequency (MHz)
Ths tem allows you to select the CPU Front Sde Bus clock frequency (n MHz). 
OC Steppng
Ths tem wll be enabled after you set the overclockng frequency n the “Adjust CPU 
FSB Frequency (MHz)”. And the followng tems wll appear. Ths tems wll help the 
system to overclock step by step after system bootng up.
Start OC Steppng From (MHz)
Ths tem s used to set the ntal FSB clock. The system wll boot wth the ntal FSB 
clock, and start to overclock from ntal FSB clock to set FSB clock that you set n 
“Adjust CPU FSB Frequency (MHz)” step by step.
OC Step
Ths tem s used to set how many steps for FSB colck overclockng.
OC Step Count Tmer
Ths tem s used to set the buer tme for every step.
Adjust CPU Rato
Ths tem s used to adjust CPU clock multpler (rato). It s avalable only when the 
processor supports ths functon.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Rato
Ths tem s used to adjust CPU-NB rato.
Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU-NB frequency. Read-only.
CPU Core Control
Ths tem allows you to select the number of actve processor cores.  
OC Gene Lte
Settng ths tem to [Enabled] allows the system to detect the maxmum FSB clock and 
to overclock automatcally. If overclockng fals to run, you can try the lower FSB clock 
for overclockng successfully. 
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶