MS-7267 Mainboard
3-16
Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state.
Resume From S3 By PS/2 Keybo
This controls how and whether the PS/2 keyboard is able to power on the
system. If you choose [Specific Key], you must type the password to power on
the system. If you want to wakeup from suspend by keyboard, please set to
[Any Key].
Resume From S3 By PS/2 Mouse
The setting determines whether the system will be awakened from power sav-
ing modes when the PS/2 mouse input signal is detected.
Resume By PCI Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event).
Resume By PCIE Device
When setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event).
Setting options: [Disabled], [Enabled].
Resume By RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 state.
To Next Page
Loading...
Need help?
General
