1-3
Getting Started
† SATAII controller integrated in ICH7/ICH7R.
- Up to 300 MB/sec transfer speed.
- Can connect up to four SATAII devices.
- Supports AHCI controller with SATA RAID 0, RAID 1 and Matrix RAID (for ICH7R).
On-Board Peripherals
† On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 2 serial ports (COM1 on Rear IO, COM2 via pin header)
- 1 VGA port (for 945G only)
- 1 parallel port supports SPP/EPP/ECP mode
- 1 Line-In / Line-Out / MIC-In / Rear Speaker Out / Center-Subwoofer Speaker
Out (5 in 1) audio connector and a optical SPDIF-Out
- 8 USB ports (Rear * 4/ Front * 4)
- 1 RJ-45 LAN jack
- 2 IEEE 1394 ports (front*1/ rear*1) (optional)
On-board LAN
†Realtek RTL8110S or RTL8100C (RTL8100C is optional)
- Supports 10 / 100 / 1000 Mb/s (1000 Mb/s on 8110S only).
- Compliane with PCI 2.2.
- Supports ACPI Power Management.
1394 (optional)
† Supports two IEEE1394 ports. Transfer rate is up to 400 Mbps.
† Controlled by VIA VT6307 chip.
Audio
† High Definition link controller integrated in Intel
®
ICH7/ICH7R chip.
† 7.1 channels audio codec Realtek ALC880
- Compliant with Azalia 1.0 Spec.
BIOS
† The mainboard BIOS provides “Plug & Play” BIOS which detects the peripheral
devices and expansion cards of the board automatically.
† The mainboard provides a Desktop Management Interface (DMI) function which
records your mainboard specifications.
Mounting and Dimension
† Micro-ATX Form Factor: 24.4 cm (W) x 24.4 cm (L)
† 8 mounting holes
To Next Page
Loading...
