To Next Page

To Previous Page

BIOS Setup

MS-7697

Chapter 3

2-13

BIOS Setup

MS-7697

Chapter 3

tRTP

Ths tem s used to adjust the tme nterval between a read and a precharge com-

mand.

tWR

Mnmum tme nterval between end of wrte data burst and the start of a precharge

command. Allows sense ampl󰘰ers to restore data to cells.

tRRD

Spec󰘰es the actve-to-actve delay of d󰘯erent banks.

tWTR

Mnmum tme nterval between the end of wrte data burst and the start of a column-

read command. It allows I/O gatng to overdrve sense ampl󰘰ers before read

command starts.

tRFC0/ 1

These settngs determne the tme RFC0/1 takes to read from and wrte to a memory

cell.

Advanced Channel 1/ 2 Tmng Con󰘰guraton

Press <Enter> to enter the sub-menu. And you can set the advanced memory tmng

for each channel.

tRWTT0/ tWRRD/ tWRWR/ tRDRD

These tems s used to set the memory tmngs for memory channel 1/ 2.

Bank Interleavng

Bank Interleavng s an mportant parameter for mprovng overclockng capablty of

memory. It allows system to access multple banks smultaneously.

CPU Voltage/ CPU-NB Voltage/ DRAM Voltage

These tems are used to adjust the voltage of CPU, CPU-NB and memory.

Overclockng pro󰘰les

Press <Enter> to enter the sub-menu.

Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6

Press <Enter> to enter the sub-menu. In the sub-menu, these tems are used to save

the current settngs, and you can to load the settngs from the stored pro󰘰le.

▶

MSI A75MA-P35 series User Manual

Questions and Answers: