To Next Page

To Previous Page

English

󰁈 DRAM Voltage [Auto]

Sets DRAM voltage. If set to "Auto", BIOS will set DRAM voltage automatically or

you can set it manually.

󰁈 Spread Spectrum

This function reduces the EMI (Electromagnetic Interference) generated by

modulating clock generator pulses.

[Enabled] Enables the spread spectrum function to reduce the EMI

(Electromagnetic Interference) problem.

[Disabled] Enhances the overclocking ability of CPU Base clock.

Important



If you do not have any EMI problem, leave the setting at [Disabled] for optimal

system stability and performance. But if you are plagued by EMI, select the value

of Spread Spectrum for EMI reduction.



The greater the Spread Spectrum value is, the greater the EMI is reduced, and

the system will become less stable. For the most suitable Spread Spectrum value,

please consult your local EMI regulation.



Remember to disable Spread Spectrum if you are overclocking because even a

slight jitter can introduce a temporary boost in clock speed which may just cause

your overclocked processor to lock up.

󰁈 CPU Memory Changed Detect [Enabled]

Enables or disables the system to issue a warning message during boot when the

CPU or memory has been replaced.

[Enabled] The system will issue a warning message during boot and than

needs to load the default settings for new devices.

[Disabled] Disables this function and keeps the current BIOS settings.

󰁈 OC Retry Count

When overclocking has failed, setting this item as [1,3] will allow system to reboot

1/ 3 times with the same overclocked con󰘰guration. If overclocking has failed every

time, the system will restore the defaults.

Questions and Answers:

Need help?

Do you have a question about the MSI A88XM-E35 V2 Series and is the answer not in the manual?

MSI A88XM-E35 V2 Series Specifications

General