Appendix B
B-13 AMD RAID
10. Enter “rcadm -C –r0 -d 0 1” to create RAID 0 (“C”=Create a array, “r0”=RAID 0,
d 0 1=HDD 0 and HDD 1). If succeeded, you will see a message “created
successfully“.
fs0:\> rcadm -C -r0 -d 0 1
created successfully
11. Reboot and install Windows 7/ 8/ 8.1 64bit (refer to Appendix B - Installing Driver
to install AMD RAID driver).
To Next Page
Loading...
