Chapter 1
1-18Getting Started
Video/ Graphics Cards 
If available, this motherboard takes advantage of the CPU’s integrate graphics 
processor, but discrete video cards can be installed by way of the motherboard’s 
expansion slots. Adding on one or more discrete video cards will signicantly boost 
the system’s graphics performance. For best compatibility, MSI graphics cards are 
recommended.
 Video Demonstration
Watch the video to learn how to install a graphics card on PCIe x16 slot 
with buttery lock.
http://youtu.be/mG0GZpr9w_A
Single Video Card Installation
Determine what type of expansion slot(s) the video card will use. Locate the 
expansion slot(s) on the motherboard. Remove any protective expansion slot 
covers from the computer case. 
Line up the video card on top of the expansion slot(s) with the display ports facing 
out of the computer case. For a single video card installation, using the PCI_E1 
slot is recommended. 
Push the video card into its expansion slot(s). Depending on the expansion slot(s) 
used, there should be clip(s) on the expansion slot(s) that will lock in place.
If needed, screw the edge of the graphics card to the computer case. Some video 
cards might require a power cable directly from the power supply.
Please consult your video card’s manual for further instructions regarding driver 
installation or other special settings.
1.
2.
3.
4.
5.