MSI FM2-A55M-P33 series User Manual

2-6
BIOS Setup
PCI Latency Tmer
Controls how long each PCI devce can hold the bus before another takes over.
When set to hgher values, every PCI devce can conduct transactons for a longer
tme and thus mprove the e󰘯ectve PCI bandwdth.
ACPI Settngs
Press <Enter> to enter the sub-menu.
ACPI Standby State
Spec󰘰es the power savng mode for ACPI functon
[Suspend Dsabled] Dsable the suspend mode.
[S3] Suspend to RAM. Turns o󰘯 hardware. (Recommended)
Power LED
Con󰘰gures how the system uses power LEDs on the case to ndcate sleep/
suspend state.
[Dual] The power LED changes ts color to ndcate the sleep/suspend
state.
[Blnkng] The power LED blnks to ndcate the sleep/suspend state.
Integrated Perpherals
Press <Enter> to enter the sub-menu.
Onboard LAN Controller
Ths tem allows you to enable/ dsable the onboard LAN controller.
LAN Opton ROM
Ths tem s used to decde whether to nvoke the Boot ROM of the onboard LAN.
Network Stack
Ths tem s used to enable/ dsable UEFI network stack.
Ipv4 PXE Support
Ths tem appears when you set “Enabled” n [Network Stack] 󰘰eld and s used to
enable/ dsable the Ipv4 PXE boot support.
Ipv6 PXE Support
Ths tem appears when you set “Enabled” n [Network Stack] 󰘰eld and s used to
enable/ dsable the Ipv6 PXE boot support.
SATA Mode
Ths tem s used to specfy RAID/ IDE/ AHCI mode for SATA port.
Important
Wndows XP s not natvely supported to be nstalled n the storage devce wth AHCI
mode. If you stll prefer to nstall Wndows XP as the operatng system, please refer
to Appendx Install Wndows XP Notes.
You cannot swtch between AHCI and IDE f you already have your operatng system
nstalled.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
•
•

MSI FM2-A55M-P33 series Specifications

General

Brand	MSI
Model	FM2-A55M-P33 series
Category	Motherboard
Language	English