Skip to content
Manuals+
User Manuals Simplified.
msi Z590 PRO Wi-Fi/ Z590-A PRO Motherboard User Guide
Home » MSI » msi Z590 PRO Wi-Fi/ Z590-A PRO Motherboard User Guide
Thank you for purchasing the MSI® Z590 PRO WIFI/ Z590-A PRO motherboard. This User Guide gives information about board layout, component overview, BIOS setup and software
installation.
Contents [ hide
1 Safety Information
2 Specifications
3 Rear I/O Panel
4 Overview of Components
5 CPU Socket
6 DIMM Slots
7 JFP1, JFP2: Front Panel Connectors
8 JAUD1: Front Audio Connector
9 SATA1~6: SATA 6Gb/s Connectors
10 M2_1~3: M.2 Slot (Key M)
11 ATX_PWR1, CPU_PWR1~2, PCIE_PWR1: Power Connectors
12 JUSB1~2: USB 2.0 Connectors
13 JUSB3~4: USB 3.2 Gen 1 5Gbps Connector
14 JUSB1: USB 3.2 Gen 2 Type-C Connector
15 JTBT1: Thunderbolt Add-on Card Connector
16 CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors
17 JTPM1: TPM Module Connector
18 JCI1: Chassis Intrusion Connector
19 JCOM1: Serial Port Connector
20 JDASH1: Tuning controller Connector
21 JBAT1: Clear CMOS (Reset BIOS) Jumper
22 JRAINBOW1~2: Addressable RGB LED connectors
23 JRGB1: RGB LED connector
24 EZ Debug LED
25 Installing OS, Drivers & MSI Center
26 Installing Drivers
27 MSI Center
28 UEFI BIOS
29 Incompatible UEFI cases
30 BIOS Setup
31 Entering BIOS Setup
32 Resetting BIOS
33 Updating BIOS
34 File Downloads
35 References
36 Related Manuals
Safety Information
The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer
assembly.
Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.
Hold the motherboard by the edges to avoid touching sensitive components.
It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available,
discharge yourself of static electricity by touching another metal object before handling the motherboard.
Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.
Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.
To Next Page
Need help?
General
