MSI GE40 - Thermal Kit and DRAM Module; DRAM Shielding Operation; Fan Removal; Heatsink Removal

GE40/CR42 (MS-1492) Disassemble Guide
■ 3、THERMAL-KIT、DRAM MODULE
3.1: Push the two side shielding of DRAM as pic
shows;.
Component
P/N
Qty
DRAM Module
S7C-S56AD01-K37
2
3.2:Remove the 2 screws(M2.5*5mm) and FAN
cable, after that remove the Fan.
Attention：the screw driver torque is 1.5-2.0Kgf-cm
Component
P/N
Qty
Fan
E33-0800261-MC2
1
Screw
E43-1255001-H29
2
3.3：Remove the 3 screws (M2.5*5mm) ，after that
remove the heatsink.
Attention：the screw driver torque is 1.2-2.0Kgf-cm
Component
P/
Qty
Screw
E43-1255001-H29
3
HEATSINK
E31-0804090-CA9
1