How to Get Started
3-16 3-17
Wired LAN
Using cables and network adapters to connect to the Internet. Before setting up the 
connection of Dynamic IP/PPPoE or Broadband (PPPoE) or Static IP, contact your 
Internet Service Provider (ISP) or network administrator for assistance of setting up 
Internet connection.
▶ Dynamic IP/PPPoE Connection
1.  Go to the desktop. Find the
 icon in the lower-right corner of the task bar, and 
then right click on it to select [Open Network and Sharing Center].
2.  Choose [Change adapter settings].
3.  Right click on [Ethernet] to select [Properties] from the drop-down menu.
4.  In the Ethernet Properties window, select [Networking] tab and check [Internet 
Protocol Version 4 (TCP/IPv4)]. Then click [Properties] to continue. 
5.  Select [General] tab, click [Obtain an IP address automatically] and [Obtain 
DNS server address automatically]. Then click [OK].  
Troubleshoot problems
Open Network and Sharing Center