MSI GX70 - Upper and Lower Case Separation; Middle Cover and Sensor Board FPC; Sensor Board Removal; WLAN Antenna and Card Removal

GX70（MS-176K）Disassembly Guide
■ 6、SEPARATE UPPER CASE AND LOWER CASE
6.1：Before remove K/B, firstly remove the Middle
Cover. Care the Sensor board FPC below the
cover.
Component
P/N
Qty
Middle Cover
307-761E213-Y31
1
6.2：Remove the Sensor board.
Component
P/N
Qty
Sensor Board
607-17622-01S
1
6.3：Remove 1 screw(M2*3mm),then remove the
wlan Antenna and wlan card.
Attention: the screw driver torque is: 1.2-1.6Kgf-cm
Component
P/N
Qty
WLAN Module
S57-08000J0-T46
1
Screw
E43-1203003-H29
1