7
Rear I/O Panel
Rear I/O Panel
PS/2 Mouse
LAN
USB 3.1 Gen2
(blue, H170A PC MATE)
USB 2.0
(black, B150 PC MATE)
USB 3.1 Gen1
PS/2 Keyboard
VGA Port
DVI-D Port
Line-in
Line-out
Mic-in
Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Speed LED
Status Description
Off 10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection
LAN Port LED Status Table
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the steps below.
1. Click on the Advanced Settings icon to open the dialog below.
2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
To Next Page
Loading...
