To Next PageTo Next Page
Need help?Do you have a question about the MSI H410M-A PRO and is the answer not in the manual?
General| Processor socket | LGA 1200 (Socket H5) |
|---|---|
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium |
| Maximum number of SMP processors | 1 |
| Non-ECC | Yes |
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 2 |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 64 GB |
| Supported memory clock speeds | 2133, 2400, 2666, 2933 MHz |
| Supported storage drive interfaces | M.2, PCI Express 3.0 |
| Parallel processing technology support | - |
| Number of SATA III connectors | 4 |
| USB 3.2 Gen 2 (3.1 Gen 2) connectors | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Wi-Fi | No |
| Ethernet interface type | Gigabit Ethernet |
| Audio chip | Realtek ALC892 |
| Component for | PC |
| Motherboard chipset | Intel H410 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| Number of mounting holes | 6 |
| Windows operating systems supported | Windows 10 x64 |
| BIOS type | UEFI AMI |
| Harmonized System (HS) code | 84733020 |
Weight and Dimensions| Depth | 190 mm |
|---|---|
| Width | 236 mm |
Explains status and speed LEDs for LAN port.
Guides on connecting front audio I/O module for 7.1 channel audio.
Instructions for installing the CPU into the socket.
Instructions for installing memory modules into DIMM slots.
Instructions for installing M.2 devices into M.2 slots.
Details on PCIe 3.0 x16 and x1 slots.
Information on SATA 6Gb/s interface ports.
Connectors for front panel switches and LEDs (JFP1, JFP2).
Connector for front panel audio jacks (JAUD1).
Connectors for ATX power supply (ATX_PWR1, CPU_PWR1).
Connector for front panel USB 2.0 ports (JUSB1).
Connector for front panel USB 3.2 Gen 1 5Gbps ports (JUSB2).
Connectors for CPU and system fans (CPU_FAN1, SYS_FAN1).
Connector for the Trusted Platform Module (JTPM1).
Connector for chassis intrusion switch cable (JCI1).
Connector for the optional serial port (JCOM1).
Jumper for resetting BIOS settings (JBAT1).
LEDs indicating motherboard status (CPU, DRAM, VGA, BOOT).
Connector for 5050 RGB LED strips (JRGB1).
Connector for WS2812B addressable RGB LED strips (JRAINBOW1).
Lists benefits of UEFI over traditional BIOS.
Discusses system requirements for UEFI compatibility.
Explains optimal default settings and potential risks.
Instructions on how to enter BIOS setup using key presses.
Describes methods to restore default BIOS settings.
Steps to update BIOS using the M-FLASH utility.
Steps to update BIOS using MSI Dragon Center software.
Step-by-step guide to install Windows 10 operating system.
Instructions for installing motherboard drivers from the disc.
Steps for installing recommended software utilities.
