vi
Safety Instructions
◙ Read the safety instructions carefully and thoroughly�
◙ All cautions and warnings on the equipment or user’s manual
should be noted�
Keep the User’s Guide that comes with the package for future
reference�
Keep this equipment away from humidity and high temperature�
Lay this equipment on a reliable at surface before setting it up.
◙ Make sure that the power voltage is within its safety range and
has been adjusted properly to the value of 100~240V before
connecting the equipment to the power outlet� Do not disable
the protective earth pin from the plug� The equipment must be
connected to an earthed mains socket-outlet�
◙ Always unplug the AC power cord before installing any add-on
card or module to the equipment�
◙ Always disconnect the AC power cord or switch the wall socket
o if the equipment would be left unused for a certain time to
achieve zero energy consumption�
◙ Rating: 100-240V~, 47-63Hz, 6-3A (Option 1),
100-240V~, 47-63Hz, 10-5A (Option 2)�
The ventilator on the enclosure is used for air convection and to
prevent the equipment from overheating� Do not cover the ventilator�
Do not leave the equipment in an unconditioned environment with a
storage temperature above 60℃ (140℉) or below 0℃ (32℉), which
may damage the equipment�
NOTE: The maximum operating temperature is around 40℃.
To Next Page
Loading...
Need help?
General
