MSI K9AG Neo2-Digital

2-18
MS-7368 Mainboard
Jumpers
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return
to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will
damage the mainboard.
JBAT1
1
Clear Data
1 3
Keep Data
1 3
Clear CMOS Jumper: JBAT1
There is a CMOS RAM onboard that has a power supply from an external battery to
keep the data of system configuration. With the CMOS RAM, the system can auto-
matically boot OS every time it is turned on. If you want to clear the system configuration,
set the jumper to clear data.
Select DVI Port / HDMI Port Jumper: J1, J2
The DVI port shares the same controller with the HDMI port. These jumpers allow you
to enable the deivce installed on it.
Enable the DVI port. Disable the HDMI port.
Enable the HDMI port. Disable the DVI port.
J1
J2
C1
C1
A1
A1
B1
B1
J1
J2
C1
C1
A1
A1
B1
B1
PDF created with pdfFactory Pro trial version www.pdffactory.com