EasyManua.ls Logo

MSI K9MM-V User Manual

MSI K9MM-V
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
i
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below.
4 Reorient or relocate the receiving antenna.
4 Increase the separation between the equipment and receiver.
4 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4 Consult the dealer or an experienced radio/ television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void
the users authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission
limits.
VOIR LA NOTICE DNSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7312
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation
G52-73121X1
Question and Answer IconNeed help?

Do you have a question about the MSI K9MM-V and is the answer not in the manual?

MSI K9MM-V Specifications

General IconGeneral
Form FactorMicro ATX
Socket TypeSocket AM2
ChipsetVIA K8M890
Memory Slots2
IDE1 x ATA133
Expansion Slots1 x PCI Express x16, 2 x PCI
USB Ports4 x USB 2.0
AudioRealtek ALC883
LAN10/100 Mbps Ethernet

Summary

Regulatory and Compliance Information

FCC Interference Statement

Statement on FCC radio frequency interference limits and user guidance for compliance.

Important Notices

Key notices concerning modifications, interface cables, and installation requirements.

Document and Legal Information

Copyright and Trademarks

Information on document intellectual property and registered company trademarks.

Revision History

Details on the document's version history and release date.

Safety and Environmental Information

General Safety Instructions

Essential guidelines for safe operation, handling, and maintenance of the equipment.

Environmental Protection

Guidance on battery disposal and environmental responsibility.

Environmental Compliance (WEEE)

WEEE Directive Statement

Information on the Waste Electrical and Electronic Equipment Directive for proper product disposal.

Product Overview

Introduction

Overview of the K9MM-V series mainboard and its target application.

Mainboard Layout Diagram

Visual representation and labeling of the mainboard's components and connectors.

Hardware Specifications

Core Components (CPU, Chipset, Memory)

Specifications for CPU support, VIA chipsets, and DDRII memory.

Interfaces and Connectivity

Details on LAN, Audio, IDE, SATA, Floppy, and USB interfaces.

Expansion Slots and Form Factor

Information on AGP, PCI slots, physical dimensions, and mounting.

Hardware Installation and Setup

CPU Installation and Cooler Setup

Step-by-step guide for installing the CPU and its cooler.

Memory Installation

Instructions for installing DDRII memory modules into the DIMM slots.

Power Supply and Drive Connections

Instructions for connecting power supply, floppy, IDE, and SATA devices.

Internal Headers and Front Panel I/O

Connecting front panel audio, USB, power switches, LEDs, and chassis intrusion sensors.

Expansion Slots and I/O Routing

Guidance on installing expansion cards in AGP and PCI slots and PCI interrupt routing.

BIOS Configuration

BIOS Setup Navigation

How to enter and navigate the BIOS Setup utility screens.

Main BIOS Features

Overview of standard CMOS, advanced BIOS, chipset, and peripheral settings.

Power Management and Monitoring

Settings for power management, fan control, and system hardware monitoring.

Advanced CPU and System Settings

Advanced CPU features like Cool'n'Quiet and system clock configurations.

Related product manuals