3-13
BIOS Setup
On-Chip ATA Devices
Press <Enter> to enter the sub-menu and the following screen appears:
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
On-Chip SATA Controller
This setting is used to specify the operating mode for SATA devices.
RAID Mode
This item is available for you to enable/disable the onboard IDE RAID function.
I/O Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
This item specifies the base I/O port addresses of the onboard Serial Port 1
(COM 1). Selecting [Auto] allows AMIBIOS to automatically determine the correct
base I/O port address.
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...
