3-24
MS-6738 Micro ATX Mainboard
Date (of Month)/Resume Time (hh:mm:ss)
If Resume By Alarm is set to Enabled, the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
IRQs Activity Monitoring
Press <Enter> and the following sub-menu appears.
Primary INTR, IRQ3 (COM2), IRQ4 (COM1), IRQ5 (LPT2), IRQ6
(Floppy Disk), IRQ7 (LPT1), IRQ8 (RTC Alarm), IRQ9 (IRQ2
Redir), IRQ10 (Reserved), IRQ11 (Reserved), IRQ12 (PS/2 Mouse),
IRQ13 (Coprocessor), IRQ14 (Hard Disk), IRQ15 (Reserved)
These settings disable/enable the monitoring of the specified IRQ’s
activity.
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.
To Next Page
Loading...
Need help?
General
