3-23
BIOS Setup
Power Off Leaves the computer in the power off state.
Power On Leaves the computer in the power on state.
Last State Restores the system to the status before power failure
or interrupt occurred.
IRQ/Event Activity Detect
Press <Enter> to enter the sub-menu and the following screen appears:
PS2KB Wakeup Select, PS2KB/MS Wakeup from S3/S4/S5, USB
Resume from S3, VGA, LPT & COM, HDD & FDD, PCI Master,
Wake Up On PME, Wake Up On Ring
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the S3/S4/S5 state. Settings: Enabled,
Disabled.
MSI Reminds You...
You need to install a modem card supporting power on function
for “Wake Up On Ring” function.
To Next Page
Loading...
Need help?
General
