14
1st Level Menu 2nd/3rd Level Menu Description
Screen Size Auto ∙ Users can adjust Screen Size in any mode, any
resolution and any screen refresh rate.
∙ Activating Screen Size 1:1 will affect:
Affected Function Function Status
» Adaptive-Sync
» PIP/PBP
» Optix Scope
Set to OFF
4:3
16:9
21:9
1:1
DisplayHDR True Black 400 ∙ Users can set the DisplayHDR to True Black
400 or Peak 1000 nits.
Peak 1000 nits
Input Source
1st Level Menu 2nd Level Menu Description
HDMI™ 1 ∙ Users can adjust Input Source in any mode.
HDMI™ 2
DP
Type C
Auto Scan OFF ∙ Users can use the Navi Key to select Input Source at
below status:
• While “Auto Scan” is set to “OFF” with the monitor at
power saving mode;
• While “No Signal” message box is shown on the
monitor.
ON
To Next Page
Loading...
Need help?
General