18
MSI OLED Care
1st Level Menu 2nd/3rd Level Menu Description
Pixel Shift Slow ∙ Pixel Shift moves the pixels of your screen at
regular intervals to reduce the possibility of
screen burn-in or image retention.
Normal
Fast
Panel Protect
∙ To maintain panel image quality, panel protect
function will automatically activate when
monitor using over 4 hours.
∙ This protect function may take several minutes
to complete.
∙ The power indicator will blink orange color until
process done.
∙ During process executing, please do not unplug
the power cord from monitor.
∙ During process executing, press power button
again to cancel this function.
Static Screen
Detection
OFF ∙ If Static Screen Detection is set to ON:
• When detecting static visuals over long
periods of time, the monitor reduces
brightness to prevent screen burn-in.
• Once detecting moving visuals, the monitor
restores its previous brightness setting.
ON
Starting in 50 Sec ∙ Starting in detects the time a static image
remains on the screen.
100 Sec
Time
required
120 Sec ∙ Time required specifies the time for brightness
reduction after detecting a static image for
50/100 seconds.
∙ The brightness reduction level depends on the
setting of Reducing Level.
240 Sec
Reducing
Level
1-7 ∙ Users can select a level for brightness
reduction.
∙ Reducing effect depends on Brightness/
DisplayHDR setting.
Multi Logo
Detection
OFF ∙ This function helps prevent image sticking
phenomenon. When set to ON, brightness
reduction of multi logo areas will kick in if logos
are detected.
∙ This function will not work when the monitor is
receiving VRR (Variable Refresh Rate) content.
VRR* VRR Content** Multi Logo
Detection
ON YES Set to OFF & Unable
to select
ON NO
Adjustable
OFF NO
ON
Reducing
Level
1-2 ∙ Users can select a level for brightness
reduction.
∙ Reducing effect depends on Brightness/
DisplayHDR setting.
To Next Page
Loading...
Need help?
General