7
1
Power LED
Lit in white after the monitor is turned on. If no signal input, the LED will
turn into orange. Lit in orange when the monitor is in Stand-by mode.
2
Power Jack
3
Macro Key
To activate OSD Application.
4
Navi Key
5
Power Button
6
HDMI™ Connector
Supports HDMI™ CEC, 3440x1440@175Hz as specified in HDMI™ 2.1.
7
HDMI™ Connector
Supports 3440x1440@175Hz as specified in HDMI™ 2.1.
8
DisplayPort
Supports 3440x1440@175Hz as specified in DisplayPort 1.4.
9
USB Type-C Port
This port supports DisplayPort Alternate (DP Alt) Mode and up to 5V/3A
(15W) power delivery.
⚠
Important
Your USB-C signal source and cable must support DisplayPort Alternate
Mode to enable video output to the monitor.
10
USB 2.0 Type-A Port
11
USB 2.0 Type-B Upstream Port
For USB Upstream Cable.
⚠
Important
Check the package for USB
Upstream Cable and connect it
to the PC and monitor. Once this
cable is connected, the USB Type-A
Downstream Ports on the monitor
will be ready for use.
To PC
To Monitor
12
Headphone Jack
13
Kensington Lock
To Next Page
Loading...
Need help?
General