10
Package contents
Device Selection - allows you to select a audio output source to change the related
options. The check sign indicates the devices as default.
Application Enhancement - the array of options will provide you a complete
guidance of anticipated sound effect for both output and input device.
Main Volume - controls the volume or balance the right/left side of the speakers
that you plugged in front or rear panel by adjust the bar.
Jack Status - depicts all render and capture devices currently connected with your
computer.
Connector Settings - configures the connection settings.
Audio 7.1-channel Configuration
connector and follow the below steps.
1.
2.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
current connected.
Auto popup dialog
which device is current connected.
Important
The pictures above for reference only and may vary from the product you purchased.
To Next Page
Loading...
