37
UEFI BIOS
FCLK Frequency [Auto]
overclocking behavior is not guaranteed.
UCLK DIV1 Mode [Auto]
Memory Try It ! [Disabled]
It can improve memory compatibility or performance by choosing optimized memory
preset. This item will be available when the installed processor supports this function.
Memory Failure Retry [Enabled]
Memory Fast Boot [Enabled]
Enables or disables the initiation and training for memory every booting.
Press Enter to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become unstable or unbootable after changing
the BIOS to load the default settings.)
DigitALL Power sub-menu
Press Enter
CPU Voltages control [Auto]
Auto
set these voltages automatically or you can set it manually.
DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto
will set these voltages automatically or you can set it manually.
Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the
memory has been replaced.
[Enabled] The system will issue a warning message during boot and then you have
to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
Press Enter to enter the sub-menu. This sub-menu displays the information of
Read only.
MEMORY-Z sub-menu
Press Enter to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
