52
UEFI BIOS
FCLK Frequency [Auto]
overclocking behavior is not guaranteed.
UCLK DIV1 Mode [Auto]
Memory Try It ! [Disabled]
It can improve memory compatibility or performance by choosing optimized memory
preset. This item will be available when the installed processor supports this function.
Memory Failure Retry [Enabled]
Memory Fast Boot [Enabled] *
Enables or disables the initiation and training for memory every booting.
[Auto] The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training
for memory. So the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
Press Enter to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become unstable or unbootable after changing
DigitALL Power sub-menu
Press Enter
CPU Voltages control [Auto]
Auto
set these voltages automatically or you can set it manually.
DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto
will set these voltages automatically or you can set it manually.
Press Enter to enter the sub-menu. This sub-menu displays the information of
Read only.
MEMORY-Z sub-menu
Press Enter to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
