MSI MEG Z590 ACE - System Control Connectors; Boot Jumpers & Controller Connectors

33
Overview of Components
JUSB3: USB 3.2 Gen 1 Connector


Important
Note that the Power and Ground pins must be connected correctly to avoid possible
damage.
1
10 11
20
1 Power 11 
2  12 
   Ground
4 Ground 14 
5  15 
6  16 Ground
7 Ground 17 
8  18 
9  19 Power
10 Ground 20 No Pin
JUSB4: USB 3.2 Gen 2 Type-C Connector


sure to connect it with the corresponding orientation.



the front panel