MSI MS-6120 - CPU Installation Procedures

CHAPTER 2 HARDWARE INSTALLATION
2-2
2.1-1 CPU Installation Procedures
A. OEM Pentium
®
II processor Installation Procedures
There are two kinds of Pentium
®
II processor that is currently used: the
OEM Pentium
®
II processor and the Boxed Pentium
®
II processor. OEM
Pentium
®
II processor has no Heat Sink, Fan and Heat Sink Support, while
the Boxed Pentium
®
II processor is provided with Heat Sink w/ fan and Heat
Sink Support.
Required Things:
Pentium
®
II processor - Processor.
*Retention Mechanism(RM) - Plastic Guide that holds the S.E.C. Catridge
in the Slot 1 connector.
*Retention Mechanism Attach Mount(RMAM) - Bolt/Bridge assemblies
inserted up through the bottom of the
motherboard. RM secures to RMAM ( 2
RMAM required per RM ).
*Heat Sink Support Base (HSSBASE) - Plastic support bar mounted to
the mainboard under the ATX heatsink.
(One leg is always bigger than the other one)
Processor
Lock
Retention
Mechanism
Pentium
®
II
Processor
Heat Sink
W/Fan
Notch Hole
Heat Sink
Support Base
Heat Sink
Support Pin
Heat Sink
Support
Top Bar