2-19
Hardware Setup
Serial ATA/Serial ATA RAID Connectors controlled by ICH5/
ICH5R: SATA1, SATA2 (Optional)
The Southbridge of this mainboard is ICH5/ICH5R which supports two
serial connectors SATA1& SATA2.
SATA1 & SATA2 are dual high-speed Serial ATA interface ports. Each
supports 1
st
generation serial ATA data rates of 150 MB/s. Both connectors are
fully compliant with Serial ATA 1.0 specifications. Each Serial ATA connector
can connect to 1 hard disk device. Please refer to Serial ATA/Serial ATA Raid
manual for detail software installation procedure.
BATT
+
7
1
SATA2
SATA1
To Next Page
Loading...
