MSI MS-6787 - Power Supply; ATX 20-Pin Power Connector: ATX1; ATX 12 V Power Connector: JPW1; Floppy Disk Drive Connector: FDD1

7
NotchVolt
Power Supply
The mainboard supports ATX power supply for the power system. Before inserting the power supply
connector, always make sure that all components are installed properly to ensure that no damage will
be caused. A 300W or above power supply is suggested.
ATX 20-Pin Power Connector: ATX1
This connector allows you to connect to an ATX power supply. To connect to the ATX power supply,
make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned.
Then push down the power supply firmly into the connector.
1
11
3.3V
3.3V
3.3V
-12V
GND
GND
GN D
GND
GN D
GN D
GND
PW_OK
-5V
5V_SB
5V
5V
12V
5V
PS _O N
5V
10
20
ATX 12V Power Connector: JPW1
This 12V power connector is used to provide power to the CPU.
1
3
2
4
GND
GND
12V
12V
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.2M, 1.44M
and 2.88M floppy disk types.