BIOS Setup
3-11
Advanced Chipset Features
Memory Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
Memclock Mode
Select the DRAM frequency programming method. If set to “Auto”, the DRAM
speed will be based on SPDs. If set to “Limit”, the DRAM speed will not exceed
the specified value. If set to “Manual”, the DRAM speed specified will be pro-
grammed regardless of SPD.
MCT Timing Mode
This field has the capacity to automatically detect all of the DRAM timing. If you
set this field to [Manual], the following fields will be selectable.
To Next Page
Loading...
