2-13
Hardware Setup
Serial ATA Connector: SATA3 ~ SATA7
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
SATA3SATA4
SATA5SATA6
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
SATA7
supported by Marvell 88SE6111
VoIP Card Connector: JSLIC1 (Only for ALC888T)
This connector connects to the VoIP card. Please refer to the instruction of the VoIP
card.
JSLIC1
1
2
21
22
SATA3~6 supported by ICH9R
7345v1.0CH2 Hardware Setup.p65 2007/5/11, 下午 02:0213
To Next Page
Loading...
