MSI MS-7353

2-9
Hardware Setup
Installing DDR2/DDR3 Turbo Card
The DDR2/DDR3 Turbo Cards are memory switchers which should be installed in
DIMM slots. If your memory is DDR2, you should install the DIMM_DDR3 side of DDR2/
DDR3 Turbo Cards into DIMM2 and DIMM5. If your memory is DDR3, you should install
the DIMM_DDR2 side of DDR2/DDR3 Turbo Cards into DIMM1 and DIMM4.
DDR2/DDR3 Turbo Card
DIMM_DDR2 Side
DIMM_DDR3 Side
When system memory
is DDR2
When system memory
is DDR3
Install the DIMM_DDR3
side of DDR2/DDR3 Turbo
Cards into DIMM2 and
DIMM5 slots.
Install the DIMM_DDR2
side of DDR2/DDR3 Turbo
Cards into DIMM1 and
DIMM4 slots.
Important
-In Dual-Channel mode, make sure that you install memory modules of the
same type and density in different channel DIMM slots.
-To enable successful system boot-up, always insert the memory modules
into the DIMM1 or DIMM2 first.