MSI MS-7353

3-22
MS-7353 Mainboard
default settings instead. Usually the Dynamic Overclocking Technology will be pow-
ered only when users' PC need to run huge amount of data like 3D games or the video
process, and the CPU and PCIE frequency need to be boosted up to enhance the
overall performance.
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the microprocessor whether the computer is running on battery or AC power. This
field will appear after you installed the CPU which support speedstep technology.
Adjust CPU FSB Frequency
This item allows you to set the CPU FSB frequency (in MHz). This item will disappear
after you set the
Adjusted CPU Frequency
It shows the adjusted CPU frequency (FSB x Ratio). Read-only.
Extreme Memory Profiles
This item will appear after you installed the memory which support XMP technology.
This item allows you to enable/ disable the Intel XMP (Extreme Memory Profiles)
technology. When you set it to [Disabled], these two items, Intel EIST & Adjust CPU
FSB Frequency, above will disappear. Only if the following item, Extreme Memory
Profiles Mode, sets to [Advance]. Save changes and reboot the system, this field
will be functioned.
Extreme Memory Profiles Mode
When you set it to [Auto], the CPU FSB frequency will be set to match the XMP
memory frequency automatically. When you set it to [Advance], you can set the CPU
FSB frequency in Adjust CPU FSB Frequency field manually. Save changes and
reboot the system, this field will be functioned.
Important
Even though the Dynamic Overclocking Technology is more stable than
manual overclocking, basically, it is still risky. We suggest user to make
sure that your CPU / memory modules can afford to overclocking regularly
first. If you find the PC appears to be unstable or reboot incidentally, it's
better to disable the Dynamic Overclocking or to lower the level of
overclocking options. By the way, if you need to conduct overclocking
manually, you also need to disable the Dynamic OverClocking first.